VCR High Flow Male Nut

Model

QCR Size

A/mm

E/mm

F/mm

N.W./g

Inch

FDM024

1/4

18

9.9

15.9

Surface Finishing

Surface Roughness

BA

0.4-1.0μm

EP

0.13-0.25μm

Material

°F

°C

SS316L

1000

538

Tube O.D.

Wall Thickness

Pressure Rating

Psi

Bar

1/8"

0.028"(0.71mm)

8550

590

1/4"

0.035"(0.89mm)

5200

359

3/8"

0.035"(0.89mm)

3350

231

1/2"

0.049"(1.24mm)

3750

259

3/4"

0.065"(1.65mm)

2400

165

1"

0.065"(1.65mm)

2400

165

Step 1

Insert gasket into female nut and make sure the gasket is settled in proper

position. Also make sure no damages on seal part while inserting.

Step 2

Turn female nut until it comes into contact with male nut. And make sure seal

part and gasket are placed in proper position.

Step 3

Final tightening shall be completed by assembly tools such as tools such as two

spanners. Tighten the female nut 1/8-1/6 turns with second spanner and make

sure that components screwing except female nut could damage the seal part

to reduce the seal capacity.

Step 4

Make sure seal part and gasket are placed in proper position.